![]() The second option requires 1 modem at each room + 1 at the router. The first option requires 3 modem pairs + 1 modem + a 5 port unmanaged gigabit switch. There are two ways to set up your moca network : a star with individual point to point moca runs ( highest possible bandwidth 1 GHz bidirectional on each run or a series ( series through the splitter ) that each node shares the total bandwidth with all other nodes. The second configuration gives you the most flexibility for future changes since it splits the isp modem away from the moca2 network. Place it between the splitters to isolate your moca network from the isp network. you can place the moca poe filter either as first described or between the 2way and the 4way splitters. If there is too much signal loss to the isp modem, use a 2 way splitter first, with the outlets going to the isp modem and then a 5 port moca2 (4 way) splitter to the gocoax modem and the 3 rooms. Connect gocoax lan port to your router lan port. Connect your router wan port to the isp modem lan port. #1) isp coax - moca poe blocking filter - 6 port moca2 rated splitter ( 1 in, 5 out ports) -out: # 1 isp modem, #2 gocoax modem, #3-5 cable to each bedroom. If doccis 3.1, then just use all moca2 rated splitters. That will affect the bandwidth of the splitter you need in addition to what moca2 requires. This will give you the frequency range of 5 to 1675 MHz. ![]() you need a bidirectional splitter certified for moca 2. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |